Motherboard Solutions

Motherboards with
AMD Chipsets


 
 
Motherboards
 



ATI Radeon™ Xpress 1250 (for Intel) -Specifications

CPU Interface
  • Intel Core 2 Duo, Core 2 Extreme, Intel Pentium 4, Pentium D, Pentium Extreme Edition, Celeron, and Celeron D processors.
  • Supports Front Side Bus (FSB) speeds 533, 800, and 1066MHz*.
  • Supports Intel Hyper-Threading Technology.
  • *Note: Not all variants support all FSB speeds
Memory Interface
  • 128-bit dual-channel DDR2 SDRAM interface.
  • Up to 16 GB of system memory.
  • Unified Memory Architecture, with 16 to 512 MB of the main memory configurable as display memory.
  • DDR2-400, -533, -667, -800 SDRAM.
PCI Express Interface
  • Compliant with the PCI Express® 1.1a Specifications.
  • One x16 graphics interface.
  • Up to 6 x1 PCI Express general purpose links.
3D Acceleration Features
  • 3D Texture support, including projective 3D textures.
  • Complete 3D primitive support: points, lines, triangles, lists, strips and quadrilaterals and BLTs with Z compare.
  • Anti-aliasing using multi-sampling algorithm with support for 2, 4, and 6 samples.
  • New generation rendering engine provides top 3D performance.
  • Support for OpenGL format for Indirect Vertices in Vertex Walker.
  • Full DirectX® 9.0 support (Vertex Shader version 2.0 and Pixel Shader version 2.0)
  • Support for up to 512b per pixel formats (4 color case).
2D Acceleration Features
  • Highly-optimized 128-bit engine, capable of processing multiple pixels per clock.
  • Hardware acceleration for ClearType font rendering.
  • Game acceleration including support for Microsoft's DirectDraw: Double Buffering, Virtual Sprites, Transparent Blit, and Masked Blit.
  • Supports a maximum resolution of 2048x1536 @ 32bpp (driver-limited).
Motion Video Acceleration Features
  • Enhanced MPEG-2 hardware decode acceleration.
  • Provides dramatically reduced CPU utilization without incurring the cost of a full MPEG-2 decoder.
  • MPEG-4 simple profile support.
  • Provides the basis for platforms with H.264 support.
  • Hardware acceleration for WMV9 playback.
  • Supports top quality DVD and time-shifted SDTV/HDTV television playback with the lowest CPU usage.
Multiple Display Features
  • Dual independent displays.
    • CRT and DVI/HDMI
    • TV and DVI/HDMI
    • DVI and HDMI
  • Resolution, refresh rates, and display data can be completely independent for the two display paths.
  • Both display controllers support true 30 bits per pixel throughout the display pipe.
  • Supports both interlaced and non-interlaced displays.
TV Out
  • An integrated TV encoder from ATI’s Xilleon™ products, with an on-chip DAC.
  • Supports Macrovision 7.1 copy protection standard (required by DVD players).
  • Supports all standard resolutions for RGB-based TVs.
  • Supports the following formats of YPbPr component output: 480i, 480p, 576i, 576p, 720p, and 1080i.
SurroundView™
  • SurroundView™ feature allows support for up to three independent monitors for systems equipped with an additional ATI discrete graphics card.
DVI/HDMI
  • Integrated DVI or HDMI 1.2 interface: single-link support only for HDMI‡, 30-bit dual-link support for DVI.
  • 1650 Mbps/channel† with 165 MHz† pixel clock rate per link.
  • HDCP 1.1 support on data stream with on-chip key storage*
Power Management Features
  • Fully supports ACPI states S1, S3, S4, and S5.
  • Support dynamic lane reduction for the PCI-E interfaces, adjusting to the task the number of lanes employed.
Universal Connectivity
  • 10 USB 2.0 ports
  • SATA Gen 2 PHY support at 3.0Ghz
  • 4 ports SATA AHCI controller supports NCQ and slumber modes
  • ATA 133 controller support up to UDMA mode 6 with 2 drives (disk or optical)
  • TPM 1.1 and 1.2 compliant
  • ASF 2.0 support for manageability control
  • HPET (high precision event timer), ACPI 3.0, and AHCI support for Windows Vista
  • Power management engine supporting Intel platforms and forward compliant to MS Windows Vista
  • UAA (universal audio architecture) support for High-Definition Audio and MODEM
  • PCI v2.3 (up to 6 slots)
  • LPC (Low Pin Count), SPI (new flash bus), and SM (System Management) bus management and arbitrations
  • “Legacy” PC compatible functions, RTC (Real Time Clock), interrupt controller and DMA controllers
 
 

AMD + ATI = The New AMD
 



©2008 Advanced Micro Devices, Inc.  |  Contact AMD  |  Careers  |  RSS Feeds  |  Terms and Conditions  |  Privacy  |  Trademark information  |  Site Map